View TX14D11VM1CPD_4562213.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

kaohsiung hitachi electronics co., ltd. for messrs: date: nov. 29 th 2008 customer?s acceptance specifications TX14D11VM1CPD contents no. item sheet no. page 1 cover 7b64ps 2701-TX14D11VM1CPD-1 1-1/1 2 record of revision 7b64ps 2702-TX14D11VM1CPD-1 2-1/1 3 general data 7b64ps 2703-TX14D11VM1CPD-1 3-1/1 4 absolute maximum ratings 7b64ps 2704-TX14D11VM1CPD-1 4-1/1 5 electrical characteristics 7b64ps 2705-TX14D11VM1CPD-1 5-1/1 6 optical characteristics 7b64ps 2706-TX14D11VM1CPD-1 6-1/2~2/2 7 block diagrame 7b64ps 2707-TX14D11VM1CPD-1 7-1/1 8 reliability tests 7b64ps 2708-TX14D11VM1CPD-1 8-1/1 9 lcd interface 7b64ps 2709-TX14D11VM1CPD-1 9-1/4~4/4 10 outline dimensions 7b63ps 2710-TX14D11VM1CPD-1 10-1/2~2/2 11 touch panel 7b64ps 2711-TX14D11VM1CPD-1 11-1/2~2/2 12 appearance standard 7b64ps 2712-TX14D11VM1CPD-1 12-1/4~4/4 13 precautions 7b64ps 2713-TX14D11VM1CPD-1 13-1/2~2/2 14 designation of lot mark 7b64ps 2714-TX14D11VM1CPD-1 14-1/1 accepted by: proposed by: kaohsiung hitachi electronics co., ltd. sheet no. 7b64ps 2701-TX14D11VM1CPD-1 page 1-1/1 www.datasheet.co.kr datasheet pdf - http://www..net/
2. record of revision date sheet no. summary kaohsiung hitachi electronics co., ltd. sheet no. 7b64ps 2702-TX14D11VM1CPD-1 page 2-1/1 www.datasheet.co.kr datasheet pdf - http://www..net/
3. general data 3.1 display features this module is a 5.7? qvga of 4:3 format amorphous silicon tft.the pixel format is vertical stripe and sub pixels are arranged as r(red), g(green), b(blue) sequentially. this display is rohs compliant, and cog (chip on glass) technology and led backlight are applied on this display. part name TX14D11VM1CPD module dimensions 167.0(w) mm x 109.0(h) mm x (10.4)(d) mm typ. lcd active area 115.2(w) mm x 86.4(h) mm dot pitch 0.12(w) mm x 3(r, g, b)(w) x 0.36(h) mm resolution 320 x 3(rgb)(w) x 240(h) dots color pixel arrangement r, g, b vertical stripe lcd type transmissive color tft; normally white display type active matrix number of colors 262k colors backlight 7 leds parallel x 3 serial (21 leds in total) weight (220) g (typ.) interface c-mos; 18-bit rgb; 40 pins power supply voltage 3.3v fo r lcd; 12v for backlight power consumption 215 mw for lcd; 1.0 w for backlight viewing direction 6 o?clock (the direction without image inversion and least brightness change) touch panel resistive type; film on gl ass; 4 wire type; antiglare surface. kaohsiung hitachi electronics co., ltd. sheet no. 7b64ps 2703-TX14D11VM1CPD-1 page 3-1/1 www.datasheet.co.kr datasheet pdf - http://www..net/
4. absolute maximum ratings item symbol min. max. unit remarks supply voltage vdd -0.3 4.0 v - input voltage of logic vi -0.2 vdd+0.2 v note 1 operating temperature top -20 70 c o note 2 storage temperature tst -30 80 c o note 2 led forward current if - 35 ma note 3 note 1: the rating is defined for the signal voltages of the interface such as dtmg, dclk and rgb data bus. note 2: the maximum rating is defined as above based on the temperature on the panel surface, which might be different from ambient temperature after assembling the panel into the application. moreover, some temperature-related phenomenon as below needed to be noticed: - background color, contrast and response time would be different in temperatures other than 25 c o . - operating under high temperature will shorten led lifetime. note 3: fig. 4.1 shows the maximum rating of led forward current against temperature. the backlight unit in this display has been set to 12 ma per led. this is within the range when operating the display between -20~70 c o . fig. 4.1 kaohsiung hitachi electronics co., ltd. sheet no. 7b64ps 2704-TX14D11VM1CPD-1 page 4-1/1 www.datasheet.co.kr datasheet pdf - http://www..net/
5. electrical characteristics 5.1 lcd characteristics item symbol condition min. typ. max. unit remarks power supply voltage vdd - 3.0 3.3 3.6 v - ?h? level 0.8vdd - vdd input voltage of logic vi ?l? level vss - 0.2vdd v note 1 power supply current idd vdd-vss=3.3v - (65) - ma note 2 vsync frequency v f - (52) 60 (68) hz - hsync frequency h f - 13.1 15.2 17.7 khz - dclk frequency clk f - 4.85 5.85 7.0 mhz - note 1: the rating is defined for the signal voltages of the interface such as dtmg, dclk and rgb data bus. note 2: an all black check pattern is used when measuring idd, v f is set to 60 hz. 5.2 backlight characteristics item symbol condition min. typ. max. unit remarks led input voltage vled backlight unit (11.5) (12.0) (12.5) v note1 led forward current iled backlight unit - 84 91 ma - led lifetime - 84 ma - 40k - hrs note 2 note 1: fig. 5.1 shows the led backlight circuit. the circuit has 21 leds in total and r is 255 c o . r r r r gnd vled(+) 84ma x 7 paraller fig. 5.1 0v vss , 25 = = c t a o c t a o 25 = kaohsiung hitachi electronics co., ltd. sheet no. 7b64ps 2705-TX14D11VM1CPD-1 page 5-1/1 www.datasheet.co.kr datasheet pdf - http://www..net/
6. optical characteristics the optical characteristics are measured based on the conditions as below: - supplying the signals and voltages defined in the section of electrical characteristics. - the backlight unit needs to be turned on for 30 minutes. - the ambient temperature is 25 c o . - in the dark room around 500~1000 lx, the equipment has been set for the measurements as shown in fig 6.1. 3.3v item symbol condition min. typ. max. unit remarks brightness of white - 200 320 - 2 cd/m note 1 brightness uniformity - 70 - - % note 2 contrast ratio cr o o 0 , 0 = = , iled= 84 ma 120 350 - - note 3 response time o o 0 , 0 = = - (45) - ms - ntsc ratio - o o 0 , 0 = = - (45) - % - x 10 cr , 0 = o 50 60 - x 10 cr , 180 = o 50 60 - y 10 cr , 90 = o 65 75 - viewing angle y 10 cr , 270 = o 45 55 - degree note 5 x 0.55 0.60 0.65 red y 0.31 0.36 0.41 x 0.33 0.38 0.43 green y 0.53 0.58 0.63 x 0.10 0.15 0.20 blue y 0.03 0.08 0.13 x 0.30 0.35 0.40 color chromaticity white y o o 0 , 0 = = 0.30 0.35 0.40 - note 6 note 1: the brightness is measured from the center point of the panel, p5 in fig. 6.2, for the typical value. note 2: the brightness uniformity is calculated by the equation as below: , which is based on the brightness values of the 9 points measured by bm-5 as shown in fig. 6.2. = = = vdd hz, 60 25 v a f c t , o lcd panel photo detector:bm-5a field 1 distance 500 mm fig. 6.1 p1 y=60x3 x=170 y=160x3 y=260x3 x=120 x=70 p4 p7 p2 p5 p8 p9 p6 p3 dot(0,0) fig. 6.2 kaohsiung hitachi electronics co., ltd. sheet no. 7b64ps 2706-TX14D11VM1CPD-1 page 6-1/2 brightness uniformity = x100% min. brightness max. brightness www.datasheet.co.kr datasheet pdf - http://www..net/
note 3: the contrast ratio is measured from the center point of the panel, p5, and defined as the following equation: note 4: the definition of response time is shown in fig. 6.3. the rising time is the period from 90% brightness to 10% brightness when the data is from white to black. oppositely, falling time is the period from 10% brightness rising to 90% brightness. data signal white white black 0 10 90 100 % brightness tr tf rising time falling time fig . 6.3 note 5: the definition of viewing angle is shown in fig. 6.4. angle o 270 = means 6 o?clock, and o 0 = means 3 o?clock. moreover, angle 3 o'clock x x' y y' z z' ,0) y (x, o = 90 o = 180 o = 270 o = 6 o'clock 12 o'clock 9 o'clock = viewing angle fig. 6.4 note 6: the color chromaticity is measured from the c enter point of the panel, p5, as shown in fig. 6.2. kaohsiung hitachi electronics co., ltd. sheet no. 7b64ps 2706-TX14D11VM1CPD-1 page 6-2/2 cr = x100% brightness of white brightness of black www.datasheet.co.kr datasheet pdf - http://www..net/
7 block diagram 5.7 qvga lcd panel source driver gate driver cn1 cn2 power circuit gamma voltage generator vdd (240, 1) (240, 960) (1, 960) led backlight signals vled (1, 1) note 1: signals are dclk, hs ync, vsync ,de and rgb data bus. kaohsiung hitachi electronics co., ltd. sheet no. 7b64ps 2707-TX14D11VM1CPD-1 page 7-1/1 www.datasheet.co.kr datasheet pdf - http://www..net/
8. reliability tests test item condition high temperature 1) operating 2) 70 c o 240 hrs low temperature 1) operating 2) -20 c o 240 hrs high temperature 1) storage 2) 80 c o 240 hrs low temperature 1) storage 2) -30 c o 240 hrs heat cycle 1) operating 2) ?20 c o ~70 c o 3) 3hrs~1hr~3hrs 240 hrs thermal shock 1) non-operating 2) -35 ? c o 85 c o 3) 0.5 hr ? 0.5 hr 240 hrs high temperature & humidity 1) operating 2) 40 c o & 85%rh 3) without condensation 4) note 3 240 hrs vibration 1) non-operating 2) 20 200 hz 3) 2g 4) x, y, and z directions 1 hr for each direction mechanical shock 1) non-operating 2) 10 ms 3) 50g 4) y x, and z directions once for each direction esd 1) operating 2) tip: 200 pf, 250 c o , the humidity needs to be reduced as fig. 7.1 shown. relative humidity rh (%) c) ( o kaohsiung hitachi electronics co., ltd. sheet no. 7b64ps 2708-TX14D11VM1CPD-1 page 8-1/1 www.datasheet.co.kr datasheet pdf - http://www..net/
9. lcd interface 9.1 interface pin connections the display interface connector is fa5b040hp1r3000 made by jae (thickness: 0.3 0.05mm; pitch: 0.5 0.05mm) and more details of the connector are shown in the section of outline dimension. pin assignment of lcd interface is as below: pin no. signal function pin no. signal function 1 vdd 21 g4 2 vdd 22 g3 green data 3 vdd 23 vss gnd 4 vdd power supply for logic 24 g2 5 nc no connection 25 g1 6 dtmg timing signal for data 26 g0 green data 7 vss gnd 27 vss gnd 8 dclk dot clock 28 r5 9 vss gnd 29 r4 10 nc no connection 30 r3 red data 11 vss gnd 31 vss gnd 12 b5 32 r2 13 b4 33 r1 14 b3 blue data 34 r0 red data 15 vss gnd 35 (ic) note 1 16 b2 36 vss gnd 17 b1 37 nc 18 b0 blue data 38 nc 19 vss gnd 39 nc 20 g5 green data 40 nc no connection note 1: keep open electrically , hitachi test use only. the backlight interface connector is bhr-03vs-1 made by jst, and pin assignment of backlight is as below: pin no. signal level function 1 v led + - power supply for led 2 nc - no connection 3 v led - - gnd kaohsiung hitachi electronics co., ltd. sheet no. 7b64ps 2709-TX14D11VM1CPD-1 page 9-1/4 www.datasheet.co.kr datasheet pdf - http://www..net/
9.2 timing chart dtmg (data enable) is the signal to determine valid data, and the timing of dtmg can be determined from hsync and vsync as below. for this display, only dtmg and dclk are the essential signals. hsync and vsync are not necessary to connect to display interface after dtmg has been generated and input. kaohsiung hitachi electronics co., ltd. sheet no. 7b64ps 2709-TX14D11VM1CPD-1 page 9-2/4 vsynchsyncdtmg r05g05b05 dtmg vsync dtmg hsync vsync hsync dclk t clk dclk dtmg data 1.5v t clkl t hd t sd t wch t wcl t fclk t rclk t hi t si t hh t sh t sv t hv t wh t hp t hfp t hbp t vp t wv t vbp t vfp t hr ,t vr t ir ,t dr t hf ,t vf t if ,t df v ih mi n. v il ma x. invalid data invalid data www.datasheet.co.kr datasheet pdf - http://www..net/
9.3 interface timing specifications item symbol min. typ. max. unit cycle time t clk (142) (171) (206) low level width t wcl 12 - - high level width t wch 12 - - rise time t rclk - - 25 fall time t fclk - - 25 ns dclk duty d 0.45 0.5 0.55 - set up time t sh 5 - - hold time t hh 10 - - ns cycle t hp 370 (385) 397 valid width t wh 4 (5) - t clk hsync rise/fall time t hr ,t hf - - 30 ns set up t sv 0 - - hold t hv 2 - - t clk cycle t vp 251 (253) 261 valid width t wv 2 (2) - t hp vsync rise/fall time t vr ,t vf - - 50 ns set up time t si 5 - - hold time t hi 10 - - ns rise/fall time t ir ,t if - - 30 ns horizontal back porch t hbp 28 (35) - horizontal front porch t hfp 22 (30) - t clk vertical back porch t vbp 6 (7) - dtmg vertical front porch t vfp 5 (6) - t hp set up time t sd 5 - - hold time t hd 10 - - ns data rise/fall time t dr ,t df - - 25 ns note 1: vsync needs to be set as odd numbers. kaohsiung hitachi electronics co., ltd. sheet no. 7b64ps 2709-TX14D11VM1CPD-1 page 9-3/4 www.datasheet.co.kr datasheet pdf - http://www..net/
9.4 power sequence note 1: in order to avoid any damages, the correct power on sequence must be followed and vdd have to be applied before all other signals (dtmg, dclk, rgb data). the opposite is true for power off where vdd have to be remained on until all other signals have been switch off. the recommended time period is 1 second. note 2: in order to avoid showing uncompleted patterns in transient state. it is recommended that switching the backlight on is delayed for 1 second after the signals have been applied. the opposite is true for power off where the backlight have to be switched off 1 second before the signals are removed. 9.5 data input for display color data signal color & gray scale r5 r4 r3 r2 r1 r0 g5 g4 g3 g2 g1 g0 b5 b4 b3 b2 b1 b0 black 0 0 0 0 000000000 0 0 00 0 red (0) 1 1 1 1 110000000 0 0 00 0 green (0) 0 0 0 0 001111110 0 0 00 0 blue (0) 0 0 0 0 000000001 1 1 11 1 cyan 0 0 0 0 001111111 1 1 11 1 magenta 1 1 1 1 1 1 0 0 00001 1 1 11 1 yellow 1 1 1 1 111111110 0 0 00 0 basic color white 1 1 1 1 111111111 1 1 11 1 black 0 0 0 0 000000000 0 0 00 0 red (62) 0 0 0 0 010000000 0 0 00 0 red (61) 0 0 0 0 100000000 0 0 00 0 : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : red (1) 1 1 1 1 100000000 0 0 00 0 red red (0) 1 1 1 1 110000000 0 0 00 0 black 0 0 0 0 000000000 0 0 00 0 green (62) 0 0 0 0 000000010 0 0 00 0 green (61) 0 0 0 0 000000100 0 0 00 0 : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : green (1) 0 0 0 0 001111100 0 0 00 0 green green (0) 0 0 0 0 001111110 0 0 00 0 black 0 0 0 0 000000000 0 0 00 0 blue (62) 0 0 0 0 000000000 0 0 00 1 blue (61) 0 0 0 0 000000000 0 0 01 0 : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : blue (1) 0 0 0 0 000000001 1 1 11 0 blue blue (0) 0 0 0 0 000000001 1 1 11 1 singnals 0.2vled 0.2vled 0.2vled 0.8vdd vdd backlight fig. 9.1 note 2 note 1 note 1 note 2 0.8vdd 0.2vdd 0.2vdd kaohsiung hitachi electronics co., ltd. sheet no. 7b64ps 2709-TX14D11VM1CPD-1 page 9-4/4 www.datasheet.co.kr datasheet pdf - http://www..net/
www.datasheet.co.kr datasheet pdf - http://www..net/
www.datasheet.co.kr datasheet pdf - http://www..net/
11. touch panel the type of touch panel used on this display is resi stive, analog, 4-wire and film on glass, and more characteristics are shown as below: 11.1 operating conditions item specification remarks operating voltage 5vdc max. - 11.2 electrical characteristics item specification remarks x1-x2 210~640 resistance between terminal y1-y2 240~680 - insulation resistance x-y 20m min. at 25v dc x 1.5% max. linearity y 1.5% max. note 1 chattering 10ms max. - note 1: the test conditions and equipments of linearity are as below: - material of pen: poly-acetal resin - end shape: r 0.8 mm - test force: 150 gf - pitch: 10 mm - test area is shown in fig. 11.1 2.8 mm 2.8 mm as shown in fig. 11.2, applying voltage meter to measure va, vb and vxm, where va is the maximum voltage in the active area; vb is the minimum voltage in the active area; vxm is the measured voltage of point x selected by random. afterwards, the linearity can be calculated by following equation: % 100 ? ? = vb va vxm vxi linearity , where vxi is the idea voltage of point x. the method to measure the linearity of y-axis is the same as above. kaohsiung hitachi electronics co., ltd. sheet no. 7b64ps 2711-TX14D11VM1CPD-1 page 11-1/2 www.datasheet.co.kr datasheet pdf - http://www..net/
11.3 mechanical characteristics item specification remarks pen input pressure 1.2n max. r0.8, polyacetal pen finger 1.2n max. r8.0, silicon rubber surface hardness 2h min. jis k 5400 11.4 optical characteristics item specification remarks transmittance 80% min. - 11.5 safety and attentions 1) do not put heavy shock or stress on the touch panel. 2) please use soft cloth or absorbent cotton with ethanol to clean the touch panel by gently wiping. moreover, please wipe it by horizontal or vertical di rection instead of circling to prevent leaving scars on the touch panel?s surface. 3) do not use any harmful chemicals such as acetone, toluene, and isopropyl alcohol to clean the display?s surface. kaohsiung hitachi electronics co., ltd. sheet no. 7b64ps 2711-TX14D11VM1CPD-1 page 11-2/2 www.datasheet.co.kr datasheet pdf - http://www..net/
12. appearance standard the appearance inspection is performed in a dark room around 2000 lx based on the conditions as below: - the distance between inspector?s eyes and display is 30 cm. - the viewing zone is defined with angle when display is shut down. the inspection should be performed within 5 when display is power on. fig. 11.1 12.1 the definition of lcd zone lcd panel is divided into 3 areas as shown in fig. 12.2 for appearance specification in next section. a zone is the lcd active area (dot area); b zone is the area, which extended 1 mm out from lcd active area; c zone is the area between b zone and metal frame. in terms of housing design, b zone is the recommended window area customers? housing should be located in. fig. 11.2 a zone b zone c zone metal frame 1 mm kaohsiung hitachi electronics co., ltd. sheet no. 7b64ps 2712-TX14D11VM1CPD-1 page 12-1/4 fi g 12.1 fi g 12.2 www.datasheet.co.kr datasheet pdf - http://www..net/
12.2 lcd appearance specification the specification as below is defin ed as the amount of unexpected phenomenon or material in different zones of lcd panel. the definitions of length, width and average diameter using in the table are shown in fig. 12.3 and fig. 12.4. item criteria applied zone length (mm) width (mm) maximum number minimum space ignored w Q 0.02 ignored - l Q 40 0.02 w Q 0.04 10 - l Q 20 w Q 0.04 10 - round (dot shape) average diameter (mm) maximum number minimum space d Q 0.2 ignore - scratches d Q 0.4 10 - a,b dent serious one is not allowed a wrinkles in polarizer seri ous one is not allowed a average diameter (mm) maximum number d Q 0.2 ignored 0.2 d Q 0.3 12 0.3 d Q 0.5 3 bubbles on polarizer 0.5 d none a filamentous (line shape) length (mm) width (mm) maximum number l Q 2.0 w Q 0.03 ignored l Q 3.0 0.03 w Q 0.05 6 l Q 2.5 0.05 w Q 0.1 1 a,b round (dot shape) average diameter (mm) maximum number minimum space d 0.2 ignored - 0.2 Q d Q 0.3 10 10mm 0.3 Q d 0.4 5 30mm 0.4 Q d none - in total filamentous + round=10 1) stains 2) foreign materials 3) dark spot those wiped out easily are acceptable a,b type maximum number 1 dot 4 2 adjacent dot 1 3 adjacent dot or above not allowed density 2/ 20mm bright dot-defect in total 5 1 dot 5 2 adjacent dot 2 3 adjacent dot or above not allowed density 3/ 20mm dark dot-defect in total 5 dot-defect (note 1) in total 10 a kaohsiung hitachi electronics co., ltd. sheet no. 7b64ps 2712-TX14D11VM1CPD-1 page 12-2/4 www.datasheet.co.kr datasheet pdf - http://www..net/
note 1: the defi nitions of dot defect are as below: - the defect area of the dot must be bigger than half of a dot. - for bright dot-defect, showing black pattern, the dot?s brightness must be over 30% brighter than others. - for dark dot-defect, showing white pattern, the dot?s brightness must be under 70% darker than others. - the definition of 1-dot-defect is the defect-dot, which is isolated and no adjacent defect-dot. - the definition of adjacent dot is shown as fig. 12.5. - the density of dot defect is defined in the area within diameter =20mm. a the dots colored gray are adjacent to defect-dot a. fig. 11.5 kaohsiung hitachi electronics co., ltd. sheet no. 7b64ps 2712-TX14D11VM1CPD-1 page 12-3/4 fig 12.5 fig 12.3 width lenght fig 12.4 a b average diameter = a+b 2 www.datasheet.co.kr datasheet pdf - http://www..net/
12.3 touch panel appearance specification the specification as below is defined by the amount of unexpected material in different zones of touch panel. item criteria applied zone width (mm) length (mm) maximum number w 0.1 l R 10 not allowed 0.10 R w 0.05 l 10 4 pcs max. scratches 0.05 R w l 10 ignored a,b filamentous (line shape) width (mm) length (mm) maximum number 0.10 R w 0.05 3 l not allowed 0.05 R w l Q 3 ignored a,b round (dot shape) average diameter (mm) maximum number d 0.35 not allowed a,b 0.35 R d 0.25 6 pcs max. b foreign materials d Q 0.25 ignored a,b the limitation of glass flaw occurred on touch panel is defined in the table as below. item specifications edge flaw x www.datasheet.co.kr datasheet pdf - http://www..net/
13. precautions 13.1 precautions of mounting 1) please refer to fig. 13.1 for housing the display with touch panel into applications. the fig. 13.1 shows some points as below: - the cushion needs to be designed between housing and touch panel in order to avoid unexpected pressure to cause any wrong reactions, and the cushion should be located in the insulated area. - the housing should not cover the active area of touch panel as the figure shown. fig 13.1 13.2 precautions of esd 1) before handling the display, please ensure your body has been connected to ground to avoid any damages by esd. also, do not touch display?s interface directly when assembling. 2) please remove the protection film very slowly before turning on the display to avoid generating esd. 13.3 precautions of handling 1) in order to keep the appearance of display in good condition, please do not rub any surfaces of the displays by sharp tools harder than 3h, especially touch panel, metal frame and polarizer. 2) please do not stack the displays as this may damage the surface. in order to avoid any injuries, please avoid touching the edge of the glass or metal frame and wore gloves during handling. 3) touching the polarizer or terminal pins with bare hand should be avoided to prevent staining and poor electrical contact. 4) do not use any harmful chemicals such as ac etone, toluene, and isopropyl alcohol to clean display?s surfaces. 5) please use soft cloth or absorbent cotton with ethanol to clean the display by gently wiping. moreover, when wiping the display, please wipe it by horizontal or vertical direction instead of circling to prevent leaving scars on the display?s surface, especially polarizer. 6) please wipe any unknown liquids immediately such as saliva, water or dew on the display to avoid color fading or any permanently damages. kaohsiung hitachi electronics co., ltd. sheet no. 7b64ps 2713-TX14D11VM1CPD-1 page 13-1/2 t/p active area (>3.6) case opening cushion tape lcm t>0.3 case case (0.2) touch panel cushion a rea www.datasheet.co.kr datasheet pdf - http://www..net/
7) maximum pressure to the surface of the display must be less than 4 10 x 1,96 pa. if the area of adding pressure is less than 1 2 cm , the maximum pressure must be less than 1.96n. 13.4 precautions of operating 1) please input signals and voltages to the displays according to the values defined in the section of electrical characteristics to obtain the best per formance. any voltages over than absolute maximum rating will cause permanent damages to this display. also, any timing of the signals out of this specification would cause unexpected performance. 2) when the display is operating at significant low temperature, the response time will be slower than it at 25 o c . in high temperature, the color will be slightly dark and blue compared to original pattern. however, these are temperature-related phenomenon of lcd and it will not cause permanent damages to the display when used within the operating temperature. 3) the use of screen saver or sleep mode is recommended when static images are likely for long periods of time. this is to avoi d the possibility of image sticking. 4) spike noise can cause malfunction of the circuit. the recommended limitation of spike noise is no bigger than 100 mv. 13.5 precautions of storage if the displays are going to be stored for years, please be aware the following notices. 1) please store the displays in a dark room to avoid any damages from sunlight and other sources of uv light. 2) the recommended long term storage temperature is between 10 o c ~35 o c and 55%~75% humidity to avoid causing bubbles between polarizer and lcd glasses, and polarizer peeling from lcd glasses. 3) it would be better to keep the displays in the container, which is shipped from hitachi, and do not unpack it. 4) please do not stick any labels on the display surface for a long time, especially on the polarizer. kaohsiung hitachi electronics co., ltd. sheet no. 7b64ps 2713-TX14D11VM1CPD-1 page 13-2/2 www.datasheet.co.kr datasheet pdf - http://www..net/
14. designation of lot mark 1) the lot mark is showing in fig.13.3. first 4 digits are used to represent production lot, t represented made in taiwan, and the last 5 digits are the serial number. 2) the tables as below are showing what the first 4 digits of lot mark are shorted for. 3) except letters i and o, revision number will be showen on lot mark and following letters a to z. 4) the location of the lot mark is on the back of the display shown in fig. 14.1. fig 14.1 year mark 2009 9 2010 0 2011 1 2012 2 2013 3 month mark month mark 1 01 7 07 2 02 8 08 3 03 9 09 4 04 10 10 5 05 11 11 6 06 12 12 week (days) mark 1~7 1 8~14 2 15~21 3 22~28 4 29~31 5 8 0 3 5 t 0 0 2 0 1 4 t : made in taiwan serial number week month year kaohsiung hitachi electronics co., ltd. sheet no. 7b64ps 2714-TX14D11VM1CPD-1 page 14-1/1 www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of TX14D11VM1CPD

	To Download TX14D11VM1CPD Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .